Channel

ACS can supply a wide range of channels and T head bolts to suit almost any application within the construction industry.

Channels & T head bolts may be supplied in a variety of lengths and materials to suit your specific needs.

The tables below show the channel types available and standard lengths / T head bolts to suit. For further information please consult ACS Stainless.

Our range consists of the following: -

• Cast in channels
• Surface fixed channels
• Plain back channels

Cast in channels are spilt into 2 groups, self-anchoring & welded anchor types. Self-anchoring channels are predominantly used for restraint ties whilst channels with welded anchors are used for heavier loadings such as fixing masonry support. Cast in channels offer continuous adjustment longitudinally and can eliminate the need for site drilling thus reducing labour on site.

Surface fixed channels are generally used for restraint ties. They may be bolted back to masonry, concrete, steelwork and steel studding with appropriate fixings. Usually installed in continuous lengths to allow the secondary fixer continuous adjustment longitudinally when installing masonry ties.

Plain back channels may be used for supporting or restraining masonry. These channels are mainly welded to either steel columns or beams during fabrication and prior to treating the steelwork to increase the life expectancy. Plain back channels again offer continuous adjustment longitudinally and can eliminate the need for site drilling thus reducing labour on site.

Cast in Channels

*Notes:
1. Other lengths are available on request, please contact ACS Stainless Steel Limited for further information.
2. Bolt sizes and lengths stated above include all sizes in all finishes. Some bolt sizes / lengths may not be available in some materials / finishes. Please consult ACS Stainless Steel Limited for further information.

Surface fixed channels

*Notes:
1. Other lengths are available on request, please contact ACS Stainless for further information.

Plain back channels

*Notes:
1. Other lengths are available on request, please contact ACS Stainless for further information.