ACP-1250 - Corner guard

Introduction

In heavy traffic areas for example multi storey car parks or factories, concrete walls or columns are prone to damage especially from moving vehicles. To protect arises of columns and walls ACS have developed the ACP-1250.

Description

The ACP-1250 is formed from flat plate to form a 50x50mm angle. Anchors are then welded to the internal faces of the angle to ensure a secure bond is achieved with the concrete. (Anchors are positioned 30mm apart to ensure they miss any reinforcement).

In addition 8mm Diameter holes are drilled in either end and come complete with suitable klink nuts for fixing to the formwork via M8 hex head setscrews (Supplied).

Materials

Normally corner guards are manufactured from grade 304 Stainless steel, however, they may be manufactured in mild steel & galvanised to order.

Specials

Standard corner guard dimensions are shown below, however, almost any length, size, material or finish may be manufactured to order.

For all bespoke requirements please liaise with the sales department.