Two-Part Tie, Type 2
(Masonry/Masonry)
Heavy Duty Tie

The 'Two-Part Tie' is designed for use in larger cavities that range from 150mm upwards. The tie is easier to install than a one piece product as the inner section (170mm in length) is installed into the inner leaf and the outer section, which is manufactured to a length to suit customers requirements, is fixed as the outer leaf is built. The tie requires an embedment of 75mm at either end. Insulation retaining clips can be supplied to suit this tie.

The Two-Part Tie exceeds the requirements of a Type 2 tie to DD140 up to 250mm cavity. Thereafter, the tie meets the requirements of a Type 3 tie to DD140 up to 350mm cavity.

Click here to download technical data
Click here to download 'Part E' test data